Bisco P Aligning element, suitable for the P-System groove

Plastic element for Clamex P and Tenso P
Align furniture parts flush together with Clamex P
Before gluing with Tenso P, check furniture for quality control with Bisco P
All angle and miter joints from 22.5° to 180°
Bisco P-10 from material thickness 12 mm, Bisco P-14 from 16 mm

Produkt

Variante

Art. Nr. 145304

Bedienungsanleitung

CAD Verbinder

CAD Verarbeitung

Eigenschaften

Flush alignment

The generous sliding tolerance allows for perfect flush alignment of workpieces

Alternating application

Combination with Clamex or Tenso. Ideal for dry joints before glueing to ensure that the groove fits.

Versatile

The minimal element depth allows for mitres of 22.5 – 180° as well as surface and corner joints and divisions

Lateral tolerance

Perfect, flush alignment of both workpieces

Low cutting depth

Minimal cutting depth with maximum tensile strength

Produktbeschreibung

The Bisco P is a plastic element. The aligning element fits into the 7 mm wide P-System groove. However, it is not anchored with positive locking like the Clamex P, but instead clamps in the groove due to its surface structure. It can be used like a wooden biscuit with PVA glue as a fixed joint. The Bisco P is used in combination with the Clamex P when only every second connector needs to apply clamping force and an aligning element in between is sufficient for joint flushness as an invisible and cost-effective alternative. Another application is the use for test connections before a workpiece is joined with a Tenso P and adhesive. The clamping force of the Tenso P is very powerful and, depending on the angle of the workpieces, disassembly may require a lot of force. It is therefore advisable to check the precision of the machining with a Bisco P. The Biscos are then simply removed from the grooves, replaced by Tenso P, adhesive is then applied and the workpieces are joined together. The Bisco P-14 is used in combination with the Clamex P-14 or Tenso P-14, the Bisco P-10 with connectors of size P-10.

Applications:

In combination with the Clamex P or Tenso P in furniture construction
Applications similar to the Lamello original wooden biscuit
Size P10: butt joints from a material thickness of 12 mm, mitre connections from a material thickness of 18 mm
Size P14: butt joints from a material thickness of 15 mm, mitre connections from a material thickness of 18 mm

Technische Angaben

Daten

Einbautoleranz längs	± 2 mm
Einbautoleranz radial	± 0 mm
Minimale Werkstückbreite	65 mm
Minimale Materialstärke für Kantenfräsung	12 mm
Minimale Materialstärke für Flächenfräsung	9 mm
Minimale Materialstärke für Mittelwandfräsung	17 mm
Minimale Materialstärke für Winkelhalbierende	15 mm
Einstellung Lamello-System	Max.
Einstellung P-System	P-10
Grösse (L x H x B)	52 x 19 x 7 mm

Verbindungsarten