Imágenes

Vídeos

Clamex P-10 Detachable connector for materials from 12 mm thickness

Detachable furniture connector, installed in seconds
For miters from 15 mm and butt joints from 12 mm material thickness
Aesthetic look with the hardly visible 6 mm access hole
All-rounder for all angle and miter joints from 22.5° to 180°
Ideal for thin materials, miters, wooden drawers, open shelves

Producto

Variante

Número de artículo 145372

Instrucciones de uso

Elemento de ensamble CAD

Procesamiento CAD

Características

Detachable

Open the connection time and time again with the rotating lever

Aesthetic

The small, hardly visible opening (Ø = 6 mm) serves to close and open the connector

Low cutting depth

Minimal cutting depth with maximum tensile strength

Versatile

The minimal element depth allows for mitres of 22.5 – 180° as well as surface and corner joints and divisions

Stackable

Workpieces with pre-installed connectors are stackable for storage and transport

Descripción del producto

The Clamex P-10 is a detachable furniture connector that is inserted into the workpiece with a positive lock in seconds. The Clamex P-10 is powerfully connected and released using a lever in a similar way to a cam connector. Compared to the Clamex P-14, the Clamex P-10 has a groove depth of only 10 mm and can therefore be used for thinner materials. The furniture connector is ideal for mitre connections and sharp angles. Like the larger Clamex P-14, the Clamex P-10 also requires an access hole of just 6 mm in diameter. Combined with its small size, the furniture connector enables aesthetic furniture designs in thin material thicknesses with joints that are almost completely concealed and in many angles. The Clamex P-10 does not use adhesive and is distinguished by its time-saving manufacturing process. The P-System groove is produced either with the Zeta P2 biscuit joiner or a CNC machining centre. The connectors are then pushed into the grooves in seconds and the workpieces are assembled and powerfully connected using levers. Waiting times are completely eliminated and an assembled workpiece can be further processed straight away or made available for shipping.

Applications:

Detachable connecting fitting for panel materials in furniture construction
Gluing aid for mitres or difficult-to-clamp angles
Concealed mitres in plywood from 15 mm or chipboard from 16 mm
Joining of wooden drawers from a material thickness of 12 mm
In kitchen manufacturing in tall cupboards, carcass manufacturing or open shelf units
In furniture construction involving high-quality furniture with mitre connections or unusual angles, wine racks or bookshelves
Butt joints from a material thickness of 12 mm
Mitre connections from a material thickness of 15 mm

Especificaciones técnicas

Datos

Tolerancias de instalación longitudinal	± 0.5 mm
Tolerancias de instalación radial	± 0.5 mm
Anchura mínima de la pieza	65 mm
Espesor mínimo del material para el fresado de bordes	12 mm
Espesor mínimo del material para el fresado s de superficie	11 mm
Espesor mínimo del material para el fresado de la pared central	19 mm
Espesor mínimo del material para la bisectriz del ángulo	15 mm
Ajuste Lamello-System	Max.
Ajuste P-System	P-10
Resistencia a la tracción en tablero de aglomerado	540 N
Resistencia a la tracción en MDF	700 N
Resistencia a la tracción en haya	900 N
Resistencia al cizallamiento en tablero de aglomerado	420 N
Resistencia al cizallamiento en MDF	530 N
Resistencia al cizallamiento en haya	1590 N
Tamaño (L x P x H)	52 x 19 x 9.7 mm