Afbeeldingen

C20/C10 The transparent element

Transparent plastic biscuit for solid surface materials
No show-through of the connector in thin, white solid surface materials
No swelling in contact with moisture
All angle and miter joints from 22.5° to 180°
Ideal for store counters, kitchen tops and for wet or outdoor areas

Product

Variant

Art. Nu. 145010

CAD connector

CAD verwerking

Eigenschappen

Transparent

No show-through of the connector in thin or light-colored composite materials

No swelling

Ideal as a connecting biscuit for use in outdoor or wet areas

Perfect fit

The precision of the joining elements and of the 4 mm groove lead to a perfect fit

Versatile

The minimal element depth allows for mitres of 22.5 – 180° as well as surface and corner joints and divisions

Lateral tolerance

The generous sliding tolerance allows for perfect flush alignment of workpieces

Productbeschrijving

C10 and C20 plastic elements are the proven connection solutions for mineral composite materials such as Corian or Varicor. The transparent plastic ensures that the connectors do not show through the material when thin materials are used. The glue for composites can be used for the joints as well as the biscuits. C10 and C20 biscuits do not swell, making them suitable for outdoor or wet applications. Sizes 10 and 20 match the two sizes of the original wooden biscuit. The 4 mm groove for the connectors can be machined with any Lamello biscuit joiner and with a standard cutter.

Applications:

Precisely fitting joints for all angles in carpentry work
Use in mineral materials such as Corian or Varicor
In kitchen manufacturing, joining kitchen worktops, in combination with the Clamex S-20
Bathroom furniture or laboratory construction applications
In shopfitting for sales counters
In outdoor areas for furniture or kitchens
Butt joints from a material thickness of 11 mm (C10)
Mitre connections from a material thickness of 10 mm (C10)

Technische specificaties

Data

Inbouwtolerantie zijdelings	± 1 mm
Inbouwtolerantie radial	± 1 mm
Minimale werkstukbreedte	71 mm
Minimale materiaaldikte voor kantenfrezen	6 mm
Minimum materiaaldikte voor oppervlakte frezen	16 mm
Minimale materiaaldikte voor tussenwandfrezen	26 mm
Minimum materiaaldikte voor hoekbissectrice	12 mm
Lamello systeeminstelling	20
Afmetingen (L x H x W)	61 x 23 x 4 mm
Sterkte	Depending on the adhesive

Typen verbindingen