Afbeeldingen

Cabineo insert M6 For repeated assembly and disassembly without loss of strength

Threaded socket in two sizes for Cabineo M6 screws
Screwing in from both sides for center wall connections increases strength
Efficient installation by hammering in
High tensile strength in the wood due to the clawed retaining grooves
Ideal for exhibition stand construction or the multiple assembly of furniture without wear and tear

Product

Variant

Art. Nu. 186370

Bedieningshandleiding

CAD connector

Eigenschappen

Wear-free connection

No wear when screwing the metric screw into a cut thread or into an insert

Anchoring on both sides

Maximum stability of a center panel joint, as the Cabineo attaches to the same insert from both sides

High load

Much higher tensile and shear strength due to good anchoring in the material

High clamping force

Very high clamping force compared to other cam connectors due to the M6 screw, which is screwed in with a cordless drill

Thin materials

The short 8mm screw enables use in centre panel joints from 16mm material thickness or in corner connections from 10mm

Productbeschrijving

The Cabineo M6 insert is a threaded insert for furniture joints and is used in combination with the Cabineo 8 M6 or Cabineo X. It is ideal for applications where the thread cannot be cut directly into the workpiece or to increase strength in corner and dividing wall connections. An 8 mm hole is drilled for installation and the threaded sleeve is then positioned and driven into the material with the installation tool. The installation tool is designed so that the Cabineo M6 insert is automatically positioned 1 mm below the panel surface when it is installed. When installing in a dividing panel, the threaded insert must be installed in the middle of the panel so that the Cabineo M6 screws are long enough to engage the insert from both sides. In order to drive the Cabineo M6 insert deeper into the material, the plastic sleeve on the installation tool is turned by 180°, which causes the insert to lie 5 mm below the panel surface. Tapping in instead of screwing in has two advantages – it is faster and the threaded inserts are always installed vertically. This prevents single external threads from being screwed into the drill hole at an angle. In addition to use with the Cabineo system, the Cabineo 8 M6 insert can also be used with standard screws with thread size M6.

Applications:

General furniture construction or carcass manufacturing for panels
Detachable joints within different materials
Built-in cupboards or wardrobes
Kitchen cupboards detachable for transport
Kitchen cabinets and open shelf units
Furniture and displays in shopfitting

Technische specificaties

Data

Inbouwtolerantie zijdelings	± 0.1 mm
Inbouwtolerantie radial	± 0 mm
Minimale werkstukbreedte	14 mm
Minimale materiaaldikte voor kantenfrezen	14 mm
Minimum materiaaldikte voor oppervlakte frezen	14 mm
Minimale materiaaldikte voor tussenwandfrezen	14 mm
Trek-breuksterkte in gecoate spaanplaat	810 N
Trek-breuksterkte in MDF	900 N
Trek-breuksterkte in beuken	2030 N
Afschuifsterkte in gecoate spaanplaat	1210 N
Afschuifsterkte in MDF	1500 N
Afschuifsterkte in beuken	2150 N
Afmetingen (L x H x W)	12.3 mm

Typen verbindingen