Country and language selection
UK-EN
Clamex S-20: the solution for detachable connections at different angles
Would you like to benefit from the advantages of a Clamex and join furniture parts at different angles, but only use a classic biscuit joiner with a 4mm cutter? No problem at all! The new Clamex S-20 makes all cuts possible with any biscuit joiner. Ideal for mitres from 22.5° to 180° and for joining thin materials from a material thickness of 8mm.
How it works
  • Cut 4mm grooves into the edge.

  • Carry over the position of the centre marking onto the first workpiece.

  • Hold the workpieces together and carry over the centre position.

  • Align the machine and attach the stop square to the front edge for exact cutting.

  • Using the drill and alignment jig, drill a 6 mm access hole into the surface.

  • Attach the connector to the drill and alignment jig, slide it into the groove and align it with light hammer blows.

  • Fasten the connector halves with screws. For brittle materials, pre-drill 2mm holes.

  • Assemble and align both components.

  • Tighten the Clamex S-20. Components can now be assembled and detached as often as required.