Country and language selection
EN
Images

K20 The clamping element, which holds the workpiece in position

  • Clamping element in size 20 for gluing
  • Lateral barbed ribs hold components in position
  • Application in combination with wooden biscuits for high joint strength
  • All angle and miter joints from 22.5° to 180°
  • Ideal for fillers or covers
Art. No. 145001
CAD Connector
CAD Processing
Features
Alternating application
Ideal combination with wooden biscuits for a high-strength connection
Barbed ridges
Anchoring during insertion holds the workpiece in the correct position until the adhesive is dry
Perfect fit
The precision of the joining elements and of the 4 mm groove lead to a perfect fit
Versatile
The minimal element depth allows for mitres of 22.5 – 180° as well as surface and corner joints and divisions
Lateral tolerance
The Lamello system allows both workpieces to be aligned perfectly flush

Product description

The K20 is a clamping element of the same size as the original wooden biscuit size 20. The furniture connector K20 has lateral adhesive strips that anchor into the 4 mm groove when inserted. The clamping element is ideal for workpieces that are difficult to clamp, such as face frames or covers. It is able to hold workpieces in the correct position until the adhesive is dry. Since the adhesive does not adhere to a plastic surface, it is advisable to use wooden biscuits and K20 biscuits in alternation. The K20 holds the component in position and the wooden biscuit gives the wood joint its ultimate strength. The 4 mm groove can be milled at almost any angle with any Lamello groove cutter.

 

Applications:

  • Precisely fitting wood joining for all angles in carpentry work
  • Ideal connector for panels, as the material is weakened less than with a dowel
  • On-site assembling aid for face frames or covers
  • Butt joints from a material thickness of 13 mm
Technical Specifications
Data
Installation tolerance longitudinal ± 1 mm
Installation tolerance radial ± 1 mm
Minimum workpiece width 71 mm
Minimum material thickness for edge cuts 8 mm
Minimum material thickness for surface cuts 13 mm
Minimum material thickness for centre wall machining 26 mm
Minimum material thickness for angle bisector 14 mm
Adjustment Lamello-System 20
Size (LxWxH) 60 x 24 x 4.5 mm
Connection Types