The Bisco P is a plastic element. The aligning element fits into the 7 mm wide P-System groove. However, it is not anchored with positive locking like the Clamex P, but instead clamps in the groove due to its surface structure. It can be used like a wooden biscuit with PVA glue as a fixed joint. The Bisco P is used in combination with the Clamex P when only every second connector needs to apply clamping force and an aligning element in between is sufficient for joint flushness as an invisible and cost-effective alternative. Another application is the use for test connections before a workpiece is joined with a Tenso P and adhesive. The clamping force of the Tenso P is very powerful and, depending on the angle of the workpieces, disassembly may require a lot of force. It is therefore advisable to check the precision of the machining with a Bisco P. The Biscos are then simply removed from the grooves, replaced by Tenso P, adhesive is then applied and the workpieces are joined together. The Bisco P-14 is used in combination with the Clamex P-14 or Tenso P-14, the Bisco P-10 with connectors of size P-10.
Applications:
Installation tolerance longitudinal | ± 2 mm |
Installation tolerance radial | ± 0 mm |
Minimum workpiece width | 65 mm |
Minimum material thickness for edge cuts | 12 mm |
Minimum material thickness for surface cuts | 9 mm |
Minimum material thickness for centre wall machining | 17 mm |
Minimum material thickness for angle bisector | 15 mm |
Adjustment Lamello-System | Max. |
Adjustment P-System | P-10 |
Size (LxWxH) | 52 x 19 x 7 mm |