Country and language selection
UK-EN

The Lamello drilling system

Unique drilling systems for high productive and aesthetic demands

Versatile connection solutions for drilling

The Lamello drilling system is divided into two product families: Cabineo and Invis Mx2. The Cabineo cabinet connector was specially developed for use on all CNC machines. The Cabineo scores points with the highest clamping force and can be preassembled in production to save time thanks to pure surface machining. The Invis Mx2 is the unique joint that satisfies the highest demands for aesthetics, stability and productivity. With no visible openings, the Invis Mx2 is quickly detached and reconnected at any time via its magnet drive.

Features Cabineo

Fast assembly

Assemble and screw together directly with the cordless drill without having to insert screws or dowels first

High clamping force

Very high clamping force compared to other cam connectors due to the 12 mm Euro screw, which is screwed in with a cordless drill

No edge drilling

For use with CNC without edge drilling

No dowel holes

Due to the high strength, no dowels are required, which completely eliminates the need for edge drilling

One-piece and pre-installed

Installation in the workshop means no losing of the housing or screw, as well as faster assembly on site
  • Vorteile in der Produktion

    Advantages in production

    • Optimised process due to surface machining; no edge drilling necessary  
    • Only one tool change from 5 mm to 15 mm drill; no tool change for the dowel hole drill necessary  
    • No dowel holes means less drill holes per connector 
    • Shallow element of 10 mm allows for panels from 12 mm thickness
  • Advantages in transportation

    • Efficient pre-installation of the one-piece connector in the factory
    • Flat pack delivery with pre-installed connectors
    • No extra bags or loose hardware required with furniture shipment
    • Detachable for transport or if the fixed shelves need adjusting
  • Advantages in assembly

    • One-piece connector without dowels; no pre-assembly of screws or dowels in the side panels necessary
    • Easy positioning of the Cabineo in the corresponding hole due to the protruding screw 
    • Fast assembly with a cordless drill 
    • Installation of fixed shelves or vertical dividers in an already assembled unit

Product videos Cabineo

Cabineo 8 / Cabineo 12 - Time-saving furniture connector without edge drilling and with very high clamping force
Cabineo 8 M6 - Wear-resistant cabinet connector for various materials and increased strength

Products Cabineo

Cabineo 12

The time-saving cabinet connector with clean surface machining and very high clamping force

Cabineo 8

Time-saving cabinet connector for centre panels from 16 mm

Cabineo 8 M6

Wear-resistant cabinet connector for various materials and increased strength

Cabineo insert M6

For repeated assembly and disassembly without loss of strength

Find the right Cabineo connector now
Find product

Cabineo X Cabinet connector and shelf support without edge drilling

Can be used with Cabineo X screws or shelf supports

Cabineo X is a connector for cabinets and shelves, that can be used with all CNC machines and is pressed into place in the workshop or on site. Due to the open housing, it is possible to insert a Cabineo screw from the top and screw it into the counterpart with a hexagon bit. Using it with screws, Cabineo X is ideal when installing shelves into already joined cabinets or when assembling corner joints. Combined with shelf supports, Cabineo X prevents shelves from being pulled out.

Features Cabineo X

No edge drilling

For use with CNC without edge drilling

Locked shelf

Secured against pulling out and lifting off; ideal for open shelf units or for caravans and shipbuilding

Multifunctional housing

Same housing for connectors and adjustable shelves

Simplified assembly

Placing the cabinet tops and shelves onto the screw or shelf pin simplifies the assembly

Various materials

Counter thread can be cut directly into the material

Product videos Cabineo X

Cabineo X - Cabinet connector and shelf support without edge drilling

Products Cabineo X

Cabineo X

Detachable, flexible and simple. Installation in an 8 mm groove with screws

Cabineo X shelf support
Cabineo screws
Find the right Cabineo connector now
Find product

Products Invis Mx2

Invis Mx2 Magnet-driven connecting fittings

For the highest demands on aesthetics, stability and productivity

Invis Mx2 is a unique, magnet-driven connection for the highest demands on aesthetics, stability and productivity. With no visible openings, Invis Mx2 is connected and disconnected quickly again and again, using its magnetic drive. Invis Mx2 connectors are screwed into the 12 mm drill holes in the panel. Using the MiniMag with a cordless drill, the connection closes and creates a clamping force of up to 250 kg per connector. Ideal for high gloss painted furniture, molded workpieces, stairs, etc.

Features Invis Mx2

High clamping force

Very high joint tension of up to 250 kg per connector

Invisible

Unique magnetic drive enables completely concealed connections for the highest demands

Detachable

The connection can always be released by reversing the direction of rotation of the cordless screwdriver
  • Powerfully screwed-together workpieces

    The magnet-driven connector enables workpieces to be connected with up to 250 kg of clamping force.

  • Can be detached in seconds

    Assembled pieces of furniture can be very quickly detached by changing the rotary direction of the MiniMag Mx2.

  • Completely invisible

    The magnetic connector Invis Mx2 allows completely invisible and yet detachable connections.

Product videos Invis Mx2

Invis Mx2 - Magnet-driven connecting fittings

Products Invis Mx2

Invis Mx2

Magnet-driven connecting fittings

Find the right Invis Mx2 connector now
Find product

Rasto drill jig Universal drill jig without measuring or marking

Precise drilling jig for timber joints with Invis Mx2 connecting fittings

Rasto is a universal drilling jig and is used for creating precise drilled holes for Invis Mx2. The drilling jig can be clamped onto almost any workpiece shape by means of three positioning pins without measuring or marking. After the first workpiece has been drilled, the position is transferred unchanged to the second workpiece. Working in this way means the holes will always line up with each other. Rasto is also suitable for 8 mm dowel holes or 5 mm holes for handles or for row hole drilling.

Features Rasto drill jig

Drill without marking

The positioning pins are used to transfer the drilling position from the first to the second workpiece

For all workpiece shapes

Many holes in the perforated plate for various insertion options for the positioning pins to clamp the Rasto to any workpiece shape

32 mm hole rows

Use as a drilling jig to drill holes for rows of holes, pot hinges or furniture handles

Product videos Rasto drill jig

Rasto - Enlargen 5mm holes

Products Rasto drill jig

Rasto drill jig

Universal drill jig without measuring or marking

Find the right connector now
Find product